Description
GPS Antenna with 3 meter wire GPS/GLONASS GNSS Antenna combines signals from GPS, GLONASS, and systems to provide high positioning accuracy. Its small size makes it ideal for use in space-restricted environments. You can use the antenna to enhance GPS signals in indoor projects with GPS and GSM modules, as well as Raspberry Pi HAT or Arduino Shield. The antenna comes with a 3-meter long cable and has a flat magnetic surface that keeps it steady at one place temporarily. You can also attach it permanently to any surface with the help of Double Sided Tape.
The high gain wide-band patch antenna on an integral ground delivers reliable performance, It is fully IP67 waterproof rated and UV resistant, making it suitable for use in outdoor environments. The mid SAW filter configuration eliminates potential LNA burn-out from nearby out of band radiated power bursts from other antennas that may be co-located nearby. We strictly control the manufacturing process to ensure first-tier Automotive-quality.
Features of GPS Antenna with 3 meter wire:
- The antenna assembly consists of a patch antenna for receiving GPS and GNSS signals and a preamplifier for signal amplification.
- Power supply to the antenna preamplifier must be provided by the application on the same RF signal trace as the GNSS RF signal is carried to the application.
- The antenna has an internal magnet so that it can be fixed on a metallic surface.
- Easy to use an antenna. Does not require RF or antenna knowledge.
| Operating Frequency | 1575 ± 5 Mhz |
| LNA gain(without cable) | > 28 dBi (with LNA) |
| Typical noise figure | 1.5dB |
| Operating Voltage (VDC) | 3 ~ 5 |
| Operating Current | 15mA |
| Max.GSM Working Frequency | 824-894/1710-1880 MHz |
| VAWR | 2:1 |
| Impendence | 50 Ohms |
| Peak gain | 2dBi at 900mhz,2dBi at 1800mhz |
| Azimuth | Omni-directional polarization, linear polarization |
| Connector | Male SMA |
| Color | Black |
Reviews
There are no reviews yet.